Metal Locking Archives - Page 2 of 3 - Metal Stitching and Metal Locking Services

Cast Iron Repair | Cast Steel | Aluminum Crack Repair By Metal Stitching, Metal Locking And Metal Surgery

By RA Power Solutions |

Repair of damage or crack in casting and heavy components manufactured out of cast iron, cast steel, aluminum, or bronze is possible by a process named metal stitching, metal locking and metal surgery. At RA Power Solutions, it is now possible to salvage and save what is otherwise a rejected component or a heavy piece […]

Cast Iron Repair | Repair Of Damaged Casting | Metal Lock | Metal Stitching

By RA Power Solutions |

Repair of cracks in cast iron, bronze, and aluminum heavy components is undertaken by RA Power Solutions by metal stitching and the metal locking process. We have been repairing the cracks and damaged casting of heavy equipment for over forty-seven years. In case of cracks repair in casting and repair of damaged heavy components, the […]

Repair Of Crack Gearbox By Metal Locking And Metal Stitching

By RA Power Solutions |

RA Power Solutions was approached by a company advising about the damage to a Gearbox base manufactured out of cast iron. This Gearbox is used for the main engine to the Propeller shaft. The base was broken into pieces. The details of damage observations are mentioned below: Sr. No. Description 1. Repair of Cracked Gear […]

Metal Stitching & Metal Locking Of Engine Block

By RA Power Solutions |

RA Power Solutions has been undertaking the repair & maintenance of heavy equipment in industries, power plants, and diesel engines installed on the vessel for the last more than 4 decades. We have observed that, despite strictly following the maintenance schedule provided in the manufacturer’s manual, serious accidents still occur. These incidents often result in […]

Cast Iron Repair | Broken Engine Block by Metal Stitching

By RA Power Solutions |

A client based in the Maldives contacted RA Power Solutions to inspect a Wärtsilä 12V32 engine block that had suffered severe damage in an accident. RA Power Solutions technicians visited the island and undertook the inspection as per the following details: The details of the crack observed are as follows: – Repairing a Damaged Wärtsilä […]

Onsite Crack Repair | Metal Lock | Metal Surgery

By RA Power Solutions |

It is surprising, but the fact is that the metal lock and metal surgery process successfully repairs cracks and damaged components manufactured from cast iron, aluminium, and cast steel. This process of Onsite Crack Repair Has replaced the old and conventional method of crack repair by welding. Crack repair by metal stitching and locking is […]

Crack Repair In Cast Iron | Aluminium | Cast Steel

By RA Power Solutions |

RA Power Solutions has repaired cracks and damaged engine blocks in a simple process. This achievement of repairing engine blocks, turbine casings, cylinder heads, and major parts of high-capacity engines is possible because of our experience in undertaking repairs of damaged and cracked casting by the metal lock and metal stitching process. The cast iron […]

CRACK REPAIR BY METAL STITCHING INSTEAD OF WELDING | 47 YEARS OF EXPERIENCE

By RA Power Solutions |

Metal stitching is a technology that is over 200 years old and now very well proven and established to undertake crack repair or damage to cast components manufactured out of cast iron or aluminium alloy. In some cases, crack repair is also possible in components made of bronze. RA Power Solutions as a repair company […]

CRACK REPAIR OF LARGE CAST IRON COMPONENT | 47+ YEARS OF EXPERTISE

By RA Power Solutions |

Accidents in the case of rotatory equipment are common. Again, it is observed that in the case of stationary heavy-duty machinery parts made out of cast iron or cast steel, cracks develop due to fatigue, casting defects, or mechanical failures. The misalignment of components, excessive vibration, or overload can also be one of the causes […]

Cracked Cast Iron Repair | Metal Stitching of Damaged Casting

By RA Power Solutions |

No engineering plant does not have welding equipment and qualified welders. In case of damage or development of cracks in heavy and large components, we have experienced that the first reaction of the factory manager or a ship engineer is to repair cracked damaged components by welding. In 90% of cases, welding repairs for cracks […]

Blog