Damaged Engine Block Archives - Page 2 of 2 - Metal Stitching and Metal Locking Services

Crack Repair In Cast Iron | Aluminium | Cast Steel

By RAPowerSolution |

RA Power Solutions has repaired cracks and damaged engine blocks a simple process. This achievement of repairing engine block, turbine casing, Cylinder heads, and major parts of high-capacity engines is possible because of our experience in undertaking repairs of damage and crack casting by metal lock and metal stitching process. The cast iron engine block […]

CRACK REPAIR BY METAL STITCHING INSTEAD OF WELDING | 45 YEARS OF EXPERIENCE

By RAPowerSolution |

Metal stitching is a technology that is over 200 years old and now very well proven and established to undertake crack repair or damage to cast components manufactured out of cast iron or aluminium alloy. In some cases, crack repair is also possible in components made of bronze. RA Power Solutions as a repair company […]

CRACK REPAIR IN ENGINE BLOCK | REPAIR OF DAMAGE CASTING

By RAPowerSolution |

In the case of high high-capacity engine, it is difficult to replace the engine block due to the development of cracks or serious damage to the block. The engines that are installed in diesel power plants and the heavy engineering industry can still be transported to designated workshops for necessary repairs, but in the case […]

CRACK REPAIR OF LARGE CAST IRON COMPONENT | 45 YEARS OF EXPERTISE

By RAPowerSolution |

Accidents in the case of rotatory equipment are common. Again, it is observed that in the case of stationary heavy-duty machinery parts made out of cast iron or cast steel, cracks develop due to fatigue, casting defects, or mechanical failures. The misalignment of components, excessive vibration, or overload can also be one of the causes […]

Cracked Cast Iron Repair | Metal Stitching of Damaged Casting

By RAPowerSolution |

No engineering plant does not have welding equipment and qualified welders. In case of damage or development of cracks in heavy and large components, we have experienced that the first reaction of the factory manager or a ship engineer is to repair cracked damaged components by welding. In 90% of the cases, the repair of […]

Damaged Engine Block and Heavy Components Successfully Repaired

By RAPowerSolution |

RA Power Solutions was advised about an accident with the auxiliary engine Yanmar 6M220L-SN by a Greece-based company that we have been serving for the last 45 years. A Team of Two Technicians was sent on board the vessel, and the following main observation was made: The scope of work included the following: Action taken […]

Cast Iron and Aluminium Components | Cold Metal Stitching

By RAPowerSolution |

Metal stitching services for cracked or damaged cast iron components are offered by RA Power Solutions. It is a very well-established and proven method used for the repair of cracks developed in heavy cast iron or Aluminium components. In fact, with our experience of forty-five years in the field of repair of heavy engines and mechanical […]

Blog