RA Power Solutions was called by a leading fertilizer-producing company based in northern India regarding a major breakdown in their plant due to an accident.
It was reported that due to an accident, the block of the CO2 compressor was badly damaged and required repair.
Action taken by RA Power Solutions for repair of CO2 compressor block
Considering the seriousness of the accident a team of three technicians was deputed. On visual inspection, it was observed that the distance piece housing of the CO2 compressor was badly damaged into pieces. Multiple cracks of different profiles and lengths were also observed on the block of the compressor, photograph is given below.
Action taken for metal stitching & repair of compressor block
- The damaged area was thoroughly cleaned by use of special chemicals.
- Paint and red oxide was completely removed.
- The MPI of the damaged area was undertaken by a qualified engineer with high-intensity magnaflux torch.
- Multiple cracks measuring in length ranging from 160 mm to 320 mm were observed.
- The large portion measuring about 8 inches by 6 inches was completely damaged hence it was decided to completely remove the damaged portion and cast a new piece.
- The area of the housing which was not accessible by the MPI equipment was subject to dye penetrant test in order to check the cracks.
- The new piece of casting was placed on the main casing and was metal stitched as can be seen in the photograph below. The photograph of the new casing piece is also given.
- The remaining cracks were repaired by a metal locking process.
- In this case considering the serious damage of the casing and multiple cracks we used L20 Locks, cast master pins length- 25 mm & diameter- 8 mm for the metal locking process.
RA Power Solutions is the only company with forty three years of experience in Major repair by metal locking and metal stitching process.
All our technicians have a valid seaman book, US VISA and can fly to any destination of the world in a short time.
We have been regularly executing metal stitching, metal locking, metal surgery & repair services in Iraq, Iran, Dubai, Oman, Saudi Arabia, Qatar, Abu Dhabi, Sharjah, Ajman, Umm Al-Quwain, Fujairah, Bahrain, Kuwait, Antigua and Barbuda, Belize, Dominica, Dominican Republic, Malaysia, Indonesia, Madagascar, Vietnam, Grenada, Guyana, Haiti, Jamaica, Saint Kitts and Nevis, Saint Lucia, South Korea, Saint Vincent and the Grenadines, Trinidad, and Tobago, etc.
Metal Surgery under Process |
For more information, Engine Block Stitching, Turbine casing crack repair on-site, Contact us on rajshahani@rapowersolutions.com or info@rapowersolutions.com, or call us at +91 9582647131 or +91 9810012383.
|
|
Co2 Compressor Block After Machining |